1, Detailed specification of product
1.Basic information:
- Color: White
- Housing Material: Nylon46
- Flammability: 94V-0
- Pitch: 1.00mm
- Circuits: 20 30 40positions
- Insulation O.D.: 0.80mm
- Mounting type: wire to board
- Application: Signal, wire to board
- Terminal materials: Phosphor bronze
- Finish terminal: gold-flash type
- Terminal Package: 15K pcs/reel
- Suitable terminal: A1004 series
- Terminal processing method: E-stamping before tin-plated
2. Electrical characteristic:
- Current Rating: 1A AC DC
- Voltage Rating: 50V AC, DC
- Contact Resistance: 20mΩ Max
- Insulation Resistance: 100mΩ
- Withstanding Voltage: 500V AC/minute
3. Mechanical characteristic:
- Temperature Range:-25°C ~+85°C
- Terminal Insertion Force: 0.50kgf (Max.)
- Terminal/Housing Retention Force: 0.50kgf (Min.)
- Pin Retention Force: 0.50kgf (Min.)
Other detailed data please check the pictures as below.
2, Introduction for this series products
Please kindly notice these series product, you can buy it as a set, then we will offer you reasonable price.
A1004 series product |
Terminal | A1004-T |
|
Housing | Dual rows type | A1004H-2XNP & A1004-2XNP-1 & A1004-2XNP-2 |
|
3,Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for further information. It's sure that it will be a
good reference for you to know this series parts clearly.
Drawing of dimension


Environmental Performance And Others Test Description | Procedure | Requirement | 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) | 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) | 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | 6-4 | Humidity | Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 | 6-5 | Temperature Cycling | 5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 40mΩ (Max.) | 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) | 6-7 | SO2 Gas | 24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. | 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | 6-9 | Solderability | Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ | Solder Wetting 95% of immersed area must show no voids, pin holes | 6-10 | Resistance to Soldering Heat | When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ | Appearance No Damage. | 7. Actuator Insertion/Withdrawal Force [Unit : kgf] Circuits | At Initial | Insertion (Max.) | Withdrawal (Min.) | Single | 0.20 | 0.04 | 2X10 | 2.50 | 0.50 | 2X15 | 3.75 | 0.75 | 2X20 | 5.00 | 1.00 | |
4, FAQ
Q: Can we have our own brand packaging? How?
A: Yes,we have designer in house to meet customized packaging requirment, all you have to do is let us know your idea or demands.
Q: Does your products print exactly the same as original?
A: Compatible products were known for its favourable prices and accurate size as originals.
Q: What is your MOQ for sample order?
A: All size sample orders are welcome.we do understand your idea to increase order gradually.
Q: What about guarantee?
A: One on one exchange for defectives exceed our guarantee rate.