Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock

Phosphor Bronze 43020 Wire To Wire Connector, 3.0mm pitch Dual Row Female Power Connector

2.50mm Pitch Plug housing(for socket contact), SMR Connector Wire to Wire Connectors

Receptacle housing Single Row Wire To Wire Connector 2.50mm Pitch SMR Connector

for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors

Single Row 4.2mm Pitch Power Connector Plug Housing with Panel Mounting Ears

5.08mm Pitch Female Connector Male Crimp Housing 4 Circuits with tin-plated Brass Contact

2.0mm Pitch Wire To Wire Connector, 2.00mm Pitch Wire-to-Wire Plug Housing, 51006 Crimp Housing

Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing

Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock

Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing

PCB Board Single Row Wire To Wire Connectors 4.20mm Pitch 2~5 Circuits

Wire To Wire Connectors 7.20mm Pitch Housing Crimp Connector for AMP 151680 equivalent

Electronic Single Row Housing Wire To Wire Connectors 6.35mm Pitch Male Housing

6.35mm Pitch Wire To Wire Connectors Triple Row PA66 Material Crimp type Power Connector

Detailed information

Basic size information	Circuits	From 2pins to 16pins
	Insulation O.D.	1.40mm(Max)
	Mating lock	None
	Wire range	AWG24# to 28#
	Halogen Free	Nylon 66,UL94V-0
	None HF type material	PBT,UL94V-0
	Matched Terminals	A2003F-T series

Electrical properties	Current Rating	2A AC, DC
	Voltage Rating	125V AC, DC
	Contact Resistance	20mΩ Max
	Insulation Resistance	1000mΩ min
	Withstanding Voltage	500V AC/minute

Mechanical properties	Temperature range	-25℃ to 85 ℃
	Terminal Insertion Force	1.50 kgf (Max.)
	Terminal/Housing Retention Force	1.20 kgf (Min.)
	Crimping Pull Out Force	AWG#24 3.0 kgf (Min.) AWG#26 2.0 kgf (Min.) AWG#28 1.0 kgf (Min.)
	Other information please kindly check the following picture.

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw actuator at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#24	3.0 kgf (Min.)
			AWG#26	2.0 kgf (Min.)
			AWG#28	1.0 kgf (Min.)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	1.50 kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	1.20 kgf (Min.)
5-5	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-6	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-7	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

2.0mm Pitch Wire To Wire Connector, 2.00mm Pitch Wire-to-Wire Plug Housing, 51006 Crimp Housing

Circuit Board Wire Connectors